Wanted - Naim shoebox case sleeve

Buy and Sell - Trade and Public
Post Reply
bigfatmonk
Posts: 3
Joined: Sat Nov 16, 2019 1:14 pm
Location: Edinburgh, UK

Wanted - Naim shoebox case sleeve

Post by bigfatmonk » Sat Nov 16, 2019 1:53 pm

Hi all!
I found this forum from the audioflat naim shoebox case page (via google, not sure the main page links to it anymore). I bought one a number of years ago to re-house the guts of a NAP140 I picked up cheap (must be about 10 years ago now, I was still a student at the time). I didn't get around to it and ended up using the sleeve for a sleeveless NAC42 I picked up along the way.

Now I'm finally trying to finally finish off the NAP140, re-housing and re-caping it, and I'm a bit dismayed to find that the sleeves aren't so readily available anymore! Does anyone have any idea where I might be able to get hold of one?
Cheers, Ben

YNWaN
Site Admin
Posts: 4024
Joined: Wed Apr 27, 2011 2:02 pm

Re: Wanted - Naim shoebox case sleeve

Post by YNWaN » Sat Nov 16, 2019 6:15 pm

Hi Ben, the cases you refer to were manufactured by my good friend Andrew (flatpopely) but were a limited production run (albeit quite a large run). Unfortunately, the last one was sold some time ago now and no further ones will be made - this is a certainty as production cost was high and no profit was made. Your best bet is probably to put a wanted advertisement on pfm.
Mark

YNWaN
Site Admin
Posts: 4024
Joined: Wed Apr 27, 2011 2:02 pm

Re: Wanted - Naim shoebox case sleeve

Post by YNWaN » Tue Nov 19, 2019 8:48 pm

Alternatively I suggest you invest 5K in producing your own - but be prepared to make a loss selling them.
Mark

bigfatmonk
Posts: 3
Joined: Sat Nov 16, 2019 1:14 pm
Location: Edinburgh, UK

Re: Wanted - Naim shoebox case sleeve

Post by bigfatmonk » Thu Nov 21, 2019 9:08 pm

YNWaN wrote:
Sat Nov 16, 2019 6:15 pm
Hi Ben, the cases you refer to were manufactured by my good friend Andrew (flatpopely) but were a limited production run (albeit quite a large run). Unfortunately, the last one was sold some time ago now and no further ones will be made - this is a certainty as production cost was high and no profit was made. Your best bet is probably to put a wanted advertisement on pfm.
Thats a bummer. Guess I better get to work on becoming an "established" pfm forum member.
YNWaN wrote:
Tue Nov 19, 2019 8:48 pm
Alternatively I suggest you invest 5K in producing your own - but be prepared to make a loss selling them.
Ouch. That's a shame. Did you buy the tooling or have them made by a third party?

YNWaN
Site Admin
Posts: 4024
Joined: Wed Apr 27, 2011 2:02 pm

Re: Wanted - Naim shoebox case sleeve

Post by YNWaN » Fri Nov 22, 2019 2:38 pm

I don’t know what became of the tooling, but I do know it was custom made for the job. The extrusions were produced by a company that actually made the originals for Naim. Naim were also kind enough to tell us the exact paint finish these cases had.
Mark

sq225917
Posts: 1065
Joined: Tue Jan 22, 2013 9:28 pm

Re: Wanted - Naim shoebox case sleeve

Post by sq225917 » Fri Nov 22, 2019 7:30 pm

Brilliant things, I must have bought 50 of them for Paradise phonostage builds.
One more Paradise left to complete.

YNWaN
Site Admin
Posts: 4024
Joined: Wed Apr 27, 2011 2:02 pm

Re: Wanted - Naim shoebox case sleeve

Post by YNWaN » Fri Nov 22, 2019 8:08 pm

Yeah, I’ve got seven in my system alone :).
Mark

sq225917
Posts: 1065
Joined: Tue Jan 22, 2013 9:28 pm

Re: Wanted - Naim shoebox case sleeve

Post by sq225917 » Sat Nov 23, 2019 9:54 am

I only have a lowly four
One more Paradise left to complete.

YNWaN
Site Admin
Posts: 4024
Joined: Wed Apr 27, 2011 2:02 pm

Re: Wanted - Naim shoebox case sleeve

Post by YNWaN » Sat Nov 23, 2019 9:56 am

For your Paradise phono I guess - I have the same plus another two with my speaker crossovers in and a final one with the turntable power supply in it.
Mark

Post Reply