Arkless Electronics Transconductance phono stage

Hi-Fi discussion
sq225917
Posts: 616
Joined: Tue Jan 22, 2013 9:28 pm

Re: Arkless Electronics Transconductance phono stage

Post by sq225917 » Sat Feb 03, 2018 2:59 pm

First panel done as per above. Gotta run out and get the four-ways before Maplins shuts. Guaranteed they won't have four of each in one shop.

Trapse Du Maplins here we come.

Jez, it'll be tomorrow, life got in the way today. 6pm ish.
One more Paradise left to complete.

Arkless Electronics
Posts: 64
Joined: Mon Oct 16, 2017 5:54 pm

Re: Arkless Electronics Transconductance phono stage

Post by Arkless Electronics » Sat Feb 03, 2018 3:11 pm

Okeydoke... ignore the text I just sent then :D

sq225917
Posts: 616
Joined: Tue Jan 22, 2013 9:28 pm

Re: Arkless Electronics Transconductance phono stage

Post by sq225917 » Sat Feb 03, 2018 7:32 pm

Image

Crap photo, they're as clean as a whistle.
One more Paradise left to complete.

Arkless Electronics
Posts: 64
Joined: Mon Oct 16, 2017 5:54 pm

Re: Arkless Electronics Transconductance phono stage

Post by Arkless Electronics » Sat Feb 03, 2018 9:01 pm

Looking good! :D

sq225917
Posts: 616
Joined: Tue Jan 22, 2013 9:28 pm

Re: Arkless Electronics Transconductance phono stage

Post by sq225917 » Wed Feb 07, 2018 9:05 pm

Made any progress yet?
One more Paradise left to complete.

YNWaN
Site Admin
Posts: 3022
Joined: Wed Apr 27, 2011 2:02 pm

Re: Arkless Electronics Transconductance phono stage

Post by YNWaN » Thu Feb 08, 2018 11:03 am

I could most likely laser etch all the input, output, loading etc. info on the back panels if you wanted me to?
Mark

Arkless Electronics
Posts: 64
Joined: Mon Oct 16, 2017 5:54 pm

Re: Arkless Electronics Transconductance phono stage

Post by Arkless Electronics » Thu Feb 08, 2018 1:33 pm

sq225917 wrote:
Wed Feb 07, 2018 9:05 pm
Made any progress yet?
No. I'll be in touch the moment there is anything to report.

Arkless Electronics
Posts: 64
Joined: Mon Oct 16, 2017 5:54 pm

Re: Arkless Electronics Transconductance phono stage

Post by Arkless Electronics » Thu Feb 08, 2018 1:35 pm

YNWaN wrote:
Thu Feb 08, 2018 11:03 am
I could most likely laser etch all the input, output, loading etc. info on the back panels if you wanted me to?
Yep that's great. Thanks. And more importantly Arkless logos on the fronts?

YNWaN
Site Admin
Posts: 3022
Joined: Wed Apr 27, 2011 2:02 pm

Re: Arkless Electronics Transconductance phono stage

Post by YNWaN » Thu Feb 08, 2018 3:38 pm

Yeah, whatever, you and Si decide on. I'll need just the panels - so removed from the rest of the case and without the fittings attached (ideally).
Mark

sq225917
Posts: 616
Joined: Tue Jan 22, 2013 9:28 pm

Re: Arkless Electronics Transconductance phono stage

Post by sq225917 » Thu Feb 08, 2018 7:41 pm

Save the metal etching for production units, little text pads to go between the sockets will do. 2cm tall 5cm wide. IN, OUT and LOAD
One more Paradise left to complete.

Post Reply