Shoebox Case for NAIM- NEW

This 'shoebox' sleeve is made to the EXACT specifications and dimensions as the original NAIM version (207mm W x 76mm H x 300mm D).

It is not bolted or welded together it is extruded just like the original.

It includes the case and the internal tray/sled. It does NOT include the Naim front panel.

This sleeve has all the details of the original including; the texture finish that continues on the inside of the case and machined and recessed earth bond holes to match the original.

If NAIM offered new sleeves they would look just like this. It really is indistinguishable from your original except it is unmarked, the paint is nice and dark with no fading over the years - your equipment will look brand NEW!!

It is painted both ends, if you want the CB ‘Chrome Bumper’ look you simply need to sand off the paint at one end, the technique is called linishing. Contact a local paint shop and they should be able to do it for you very cheaply. This is what NAIM did to achieve the CB look.

Features:-

• This sleeve is compatible with all* NAIM full depth shoebox equipment.
• Sleeve outer dimensions 207mm x 76mm x 300mm (W x H x D)
• Extruded Aluminium sleeve manufactured to exacting tolerances by a NAIM OEM supplier
• Two part texture paint finish using identical paint and finishing techniques as the original
• Machined holes for 4 feet (feet not supplied)
• Machined holes for the earth bond bolt (bolt not supplied)
• Sturdy custom made transit packaging

*NAP (90/110/140) series may need two holes drilling for the heatsink bolts.

The above picture shows a sled (a NAIM one but ours are identical) that I used for a DIY NAIM HiCAP project. It uses a Hacker Reg board and 2 x Teddy Pardo SuperTeddyregs. This powers a NAIM Prefix K and it's a super sounding phono stage!
Read about building something like the above here

The above two pictures show a couple of cases that have been used to house a truly wonderful DIY Pre and Power amp combo.

To buy one of cases visit here